Countronics
Sahibabad, Ghaziabad, Uttar Pradesh
GST No. 09AABHD8394P1ZI
TrustSEAL Verified
Call 0804897119574% Response Rate
SEND EMAIL
Product Details:
| Usage/Application | Industrial |
| Brand | Omega |
| Control Type | High Limit |
| Current | 1 A |
| Pole Type | Single Pole |
| Throw Type | Single Throw |
| Certifications | CE |
| Display | : 3½ Digit LCD 12.5 mm |
| Range | : 0.00 - 14.00 pH |
| Auto Temp Compensation | : 0-100°C with PT 100 Sensor. |
| Set Limits | : 0 - 14.00 pH for ACID & BASE |
| Alarm Limits | : 0 - 14.00 pH for ACID & BASE |
| Accuracy | : 0.5% ±1 Digit. |
| Input Impedance | : > 10¹² Ohms. |
| Relay Outputs | : 110V/220V AC @ 5 Amp. (Except Consent Contact). |
| Transmitter Output | : 4-20mA Isolated. |
| Consent Contact | : ON when pH within ACID & BASE Limits. |
| Calibration | : Standard pH 7 : 7 ± 1 |
| Slope pH 4: 4 ± 1 | |
| Supply | : 110/220V AC ± 10% |
| Control Logic | :acid : Ph > Set Limit. Acid Relay On |
| :base : Ph < Set Limit, Base Relay | |
| Alarm : Ph > Acid Alarm Or < Base Alarm, Then Alarm Relay On | |
| Front Panel Controls | : One single touch switch to select sequentially the LCD Display indication |
| a) pH. (NORMAL) b) ACID SET LIMIT c) ACID ALARM LIMIT d) BASE SET LIMIT e) BASE ALARM LIMIT In case the equipment is left unattended on any position other than normal, it will revert automatically to normal after 30 secs. | |
| Size | :Front FACIA: 96mm x 96mm |
| :Panel Cutout: 92mm x 92mm :DEPTH: 141mm + 5mm | |
| Shipping Weight | :1000 grms. |
Product Details:
| Input Sensor | COMBINED PH AND ORP CONTROLLER |
| Model Number | COMBINED PH AND ORP CONTROLLER |
| Usage/Application | Industrial |
| Brand | Honeywell |
| Control Type | High Limit |
| Current | 1 A |
| Pole Type | Single Pole |
| Throw Type | Single Throw |
This unique control system allows both pH and ORP to be controlled and monitored simultaneously. ORP measures the oxidation level in the water typically as a result of water treatment by Chlorine, Bromine, Ozone, Peroxides, Peracetic Acid, etc., and pH allows optimum conditions for the chemistry to be effective.
Chemical Automation is recommended by Health Department officials and water quality experts as the only reliable solution to the problems of water chemistry, and in the maintenance of safe and hygienic water. Chemical automation pays for itself very rapidly, through savings in chemicals and maintenance.
Specifications:
| pH Range: | 0.00 - 14.00pH |
| pH Resolution: | 0.01pH |
| pH Control: | Adjustable set point in range 5.20 - 10.00pH |
| pH 115VAC outlet: | Powered when actual pH reading is ABOVE the Set Point |
| ORP Range: | +/- 1999mV ORP |
| ORP Resolution: | +/-1mV ORP |
| ORP Control: | Adjustable set point in range 200 - 600mV (can be modified) |
| ORP 115VAC outlet: | Powered when actual ORP reading is BELOW the Set Point |
| Display: | pH LCD / H=1 /2" (12.5mm), ORP LCD / H=3/8" (7.7mm) |
| Dimensions: | 6.2x 6.7x 2.2" (WxHxD) |
| Weight: | 1.7Lbs. / 0.8kg |
| Power Consumption: | 115VAC/60Hz / 0.25Amp |
| pH and ORP outlets: | 115VAC/60Hz / Maximum 5 Amp. per outlet |
Product Details:
| Model Number | pH Controller |
| Brand | pH Controller |
| Control Type | High Limit |
| Pole Type | Single Pole |
| Type | pH Controller |
Product Details:
| Brand | Countronics |
| Control Type | High Limit |
| Pole Type | Single Pole |
| Throw Type | Single Throw |
| Certifications | CE |
| Sterilization Control | DUAL LIMIT PH CONTROLLER |
| Emc Standards | DUAL LIMIT PH CONTROLLER |
pH Controller With Dual Limits And Isolated 4-20ma TX. Output
Model 110pH
Features:
| Display | 3½ Digit LED 0.56” character height |
| Range | 0.00 to 14.00 pH |
| Auto Temperature | 0-100°C using PT100 external sensor Compensation |
| Calibration | Standard pH-7 : 7.00 ± 1, Slope pH-4 : 4.00 ± 1 |
| Alarm Limits | 0 to 14.00 for Acid/Base |
| Accuracy | 0.5% ± 1 Digit |
| Input Impedance | >1012 Ω |
| Tx. Output | 4-20mA isolated for 0-14.0 pH |
| Relay Output (2 Nos) | Contact rating 5A at 220V AC |
| Control Relay Logic | Acid Relay ON for pH > Set Limit, Base Relay ON for pH < Set Limit |
| Consent Contact Output | P-NO contact rating 5A/220V AC ON when pH within ACID & BASE Limits. |
| Supply | 110V AC/220V AC ± 10% at 50Hz/60Hz |
| Size | 96mm x 96mm facia & Cut Out 92mm x 92mm |
| Enclosure | Plastic (ABS) flame retardant |
| Weight | 800gms |
| Display | 3 1/2 Digit 0.5 inch height LCD display |
| Ranges | 0-14.00 pH |
| Input Impendence | >10¹² OHMS |
| Resolution | 0.01 pH |
| Size | 6.2*6.7*2.2 |
| Temp. Compensation | Automatic using PT-100 Temp Sensor |
| Calibration | Front Adjustable pH 4 and pH 7 |
| Accuracy | +/- 0.5% |
| Supply | 220V +/- 15% AC 50Hz |
Display | : 3½ Digit LCD. |
| Range | : pH : 0 - 14.00 pH |
| : ORP : 0-1999mV | |
| Temp | : -100°C to 199.9°C. |
| Accuracy | : 0.5% ± 1 Digit. |
| Supply | : 110/220V AC ± 10%. |
| Input Impendence | : >10¹² Ohms for pH/ORP. |
| Calibration | : For pH 4 AND pH 7. |
| Display Select | : By touch membrane switch indication with LEDs. |
| Temp Compensation | : Manual : Range 0 - 100°C Automatic : Range 0 - 100°C |
| Outputs | : pH : 4-20 mA Isolated for 0 -14 pH |
| : ORP : 1999 mV Non- Isolated | |
| : TEMP : 0 - 1 V for 0-100°C Non Isolated. | |
| Mounting | :Wall Mounting on two Screws. |
| Size | :160 mm x 170 mm |
| Depth | :60 mm |
| Shipping Weight | :900 grms.. |
Additional Information:
Product Details:
| Input Sensor | Digital ORP Controller |
| Model Number | Digital ORP Controller |
| Usage/Application | Industrial |
| Temperature Range | Digital ORP Controller |
| Control Type | High Limit |
| Current | 1 A |
| Pole Type | Single Pole |
| Throw Type | Single Throw |
| Certifications | CE |
| Packaging Type | Digital ORP Controller |
Indicates the value of Oxidation-Reduction Potential (REDOX) when attached to an ORP electrode.
User settable separate control limits and control outputs for Oxidation and reduction
A consent contact input, at the rear, enables all control outputs. This consent input is the output of a pH controller. The equipment also provides an isolated 4 to 20mA output for recorder purpose.
Specifications:
| Display | : 3½ Digit LCD 12.5 mm |
| Range | : ± 1999 mV |
| Set Limits | : 0-1999 mV for OXID/REDUC |
| Accuracy | : 0.5% ± 1 Digit |
| Input Impedence | : > 10¹² Ohms |
| Relay Outputs | : 110V/220V AC 5 Amp. |
| Transmitter Output | : 4-20 mA Isolated for 0-1000 mV |
| Calibration Zero Adjust | : RANGE ± 30 mV |
| Consent Contact Input | : From pH CONTROLLER. If open , cuts off all Relay Outputs. |
| Supply | :110/220V AC ± 10% |
| Control Logic | : REDUC : ORP > SET LIMIT. REDUC RELAY ON. |
| : OXID : ORP < SET LIMIT. OXID RELAY ON. | |
| Size | : 96x96x141mm |
| Shipping Weight | : 1000 grms. |
Additional Information:
Additional Information:
Model 5501
Accurate pH display with 0.01pH resolution
Auto buffer recognition with 2 point calibration for pH
Auto/Manual temperature compensation selectable for both pH and Conductivity
4 Step Range selection 0.1µs to 199.9ms for conductivity
Cell Factor selectable for both 1.0 and 0.1
Digital calibration for conductivity
Auto Temp Compensation using PT100 sensor
One touch switching between conductivity and pH display selections
Large alphanumeric LCD display with bright back light
Aesthetically designed front panel with membrane switches and sleek bench top cabinet
Specification
| Display | 2 line large alphanumeric display with back light illumination |
| Ranges | pH: 0.00 to 14.00 pH ORP: 0-2000mV Conductivity:19.99ms/1999µs/199.9µs/19.99µs in 0.1 |
| Resolution | pH: 0.01pH ORP: 1mV |
| Auto Temp. Comp. | 0-1000C using PT100 external sensor for pH and Conductivity |
| Manual Temp. Comp. | Settable from front panel from 0-100.0°C for pH and Conductivity |
| pH Calibration | 2 Point calibration with auto buffer recognition. Buffers recognized: 4.00, 7.00, 9.00, 10.00 pH |
| Conductivity Calibration | Digital calibration by factor multiplication from 0.75-1.25 |
| Accuracy | 0.5% ± 1 Digit |
| Supply | 220V AC ±10% 50Hz |
| Display | : 3 1/2 Digit 0.5 inch height Red LED. |
| Range | : 0-14.00 pH |
| Input Impendence | : >10¹² OHMS |
| Resolution | : 0.01 pH |
| Accuracy | : +/- 0.5% |
| Calibration | : Front Adjustable pH 4 & pH 7 |
| Temp. Compensation | : Automatic using PT-100 Temp Sensor |
| Supply | : 220V +/- 15% AC 50Hz |
| Size | : 96x96mm Front Facia |
| Display | : 3½ Digit LCD 12.5 mm |
| Range | : ± 1999 mV |
| Set Limits | : 0-1999 mV for OXID/REDUC |
| Alarm Limits | : 0-1999 mV for OXID/REDUC. |
| Accuracy | : 0.5% ± 1 Digit |
| Input Impedence | : > 10¹² Ohms |
| Relay Outputs | : 110V/220V AC 5 Amp. |
| Transmitter Output | : 4-20 mA Isolated for 0-1000 mV |
| Calibration Zero Adjust | : RANGE ± 30 mV |
| Consent Contact Input | : From pH CONTROLLER. If open , cuts off all Relay Outputs. |
| Supply | :110/220V AC ± 10% |
| Control Logic | : REDUC : ORP > SET LIMIT. REDUC RELAY ON. |
| : OXID : ORP < SET LIMIT. OXID RELAY ON. | |
| : ALARM : ORP > REDUC ALARM or < OXID ALARM then ALARM RELAY ON. | |
| Front Panel Controls | : One single touch switch to select sequentially the LCD Display indicator. |
| a) ORP (Normal) b) OXID SET LIMIT c) OXID ALARM LIMIT d) REDUC. SET LIMIT e) REDUC ALARM LIMIT In case the equipment is left unattended on any position other than normal, it will revert automatically to normal after 30 secs. | |
| Size of Front Facia | : 96 mm x 96 mm |
| Size of Panel Cutout | : 92 mm x 92 mm |
| Depth | : 141 mm + 5 mm |
| Shipping Weight | : 1000 grms. |