Display | 2 line large alphanumeric display with back light illumination |
Ranges | pH: 0.00 to 14.00 pH ORP: 0-2000mV Conductivity:19.99ms/1999µ /199.9µs/19.99µs in 0.1 Cell Constant 199.9ms/19.99ms/1999µs/199.9µs in 1.0 Cell Constant TDS: 0-1999ppm |
Resolution | pH: 0.01pH ORP: 1mV Conductivity: 0.01ms or 0.01µs depending on range & Cell factor TDS: 1ppm |
Auto Temp. Comp. | 0-1000C using PT100 external sensor for pH and Conductivity |
Manual Temp. Comp. | Settable from front panel from 0-100.00C for pH and Conductivity |
pH Calibration | 2 Point calibration with auto buffer recognition. Buffers recognized: 4.00, 7.00, 9.00, 10.00 pH |
Conductivity Calibration | Digital calibration by factor multiplication from 0.75-1.25 |
Accuracy | 0.5% ± 1 Digit |
Supply | 220V AC ±10% 50Hz |
Enclosure | Plastic (ABS). Size - 272x192x90mm |
Weight | 900gms |
Model 1004
Display | : 3 ½ Digit 13mm High, RED LED. |
Cell Factor | : 1.0 & 0.1 Selectable. |
Conductivity Range | : A)For Cell Factor 1.0 |
1) 199.9 mS/cm 2) 19.99 mS/cm 3) 19999 mS/cm 4) 199.9 mS/cm | |
: B)For Cell Factor 0.1 | |
1) 19.99 mS/cm 2) 19999 mS/cm 3) 199.9 mS/cm 4) 19.99 mS/cm | |
TDS Range | : 2000 ppm |
Temperature Compensation | : Automatic Using External PT-100 Sensor.. |
Supply | : 220V AC ± 15% @ 50Hz/60Hz |
Size | : Front Fascia – 96mm x 96mm, Cut -Out – 92mm x 92mm |
Cabinet | : Powder coated metallic cabinet |
Display | : 3 ½ Digit LCD |
Range | : Selectable by Rear Rotary Switch. 199.9mS/cm 1999mS/cm 19.99 mS/cm 199.9 mS/cm |
Cell Constant | : 1 ( Calibration adjustable from the front Panel). |
Set Points | : 2 independent set limits one High & one Low |
Relay Outputs | : 2 (One each for High and Low limits) |
Output Contacts | : Potential Free NO-P-NC |
Temperature Compensation | : Automatic using External PT 100. |
Re-Transmission Output | : 0-2V Over the Entire Range |
Supply Voltage | : 110/220 V AC +/- 15% 50/60 Hz |
Size | : 96x96mm FACIA & 92x92mm CUTOUT. |
Shipping Weight | 500grms |