The Peak Hold Indicator comes with stop feature on sample break. It is specially designed for digital tensile testing machine and ultimate torque strength testing machine. This indicator finds use in most manufacturing industries, specially where strength has to be tested like springs, crimps, switchgear parts, wires and threads.

Peak Load Indicator Logger With Pace Rate Indication For CTMs

Model CT902

Large alphanumeric LCD display with backlight

Pace Rate display in KN/sec
Sample Area digitally settable
Stress at Peak load calculated & displayed
Auto incrementing Sample Number
Peak/Normal mode selectable
Buzzer alarm for peak detection in Peak Mode
Relay output for load limit detection
Real Time Clock setting with battery backup
Digital tare provided
Non-volatile memory for saving configuration
Formatted RS-232 serial output for logging on PC
Configuration lock at rear to prevent tampering
Aesthetically designed front panel with membrane switches

Specification:

Display	2 Line alphanumeric display with back light illumination 4 digit for Load in KN , 3 digit for Pace Rate in KN/sec Peak/Normal indication
*Range*	a. Load: 0.1KN to 6000KN b. Set Load (Limit) : 0.1KN to 6000KN c. Sample Area : 0.1cm2 to 999.9cm2
Accuracy	±0.1% of Full Scale ± 1 digit
Input	From 2 wire loop transmitter giving 4-20mA output 4-20mA input => 0 - Range
Relay Logic	When Actual Load ≥ Set Load Limit relay switches On.
Normal/Peak Mode	Selectable from front panel with indication of mode
Serial Output	Formatted RS-232 output to interface for logging using Hyperterminal
Real Time Clock	Date and Time setting with internal battery backup
Sample No.	Auto increment with resetting option
Peak Detection	Peak hold is resettable from front Reset Switch or by parallel rear external contact
Tare Facility (Zero)	Digital Tare using front panel Tare switch up to a maximum of 50KN (for removing initial offset error)
Memory	Non-volatile EEPROM to save settings
Configuration Lock	On rear terminals to prevent unauthorized/accidental alteration of Range using front switches
Supply	220V AC ± 15% 50/60Hz
Dimensions	Front Fascia: 96mm x 192mm Cut Out : 92mm x 188mm

Send Enquiry

Peak Load Indicator Logger With Pace Rate Indication For CTMs

Peak Load Indicator With Internal Peak Recording For CTMs

Peak Load Indicator With Internal Peak Recording For CTMs

Model CT901

Separate displays for load indication and maximum range
Range for load indication corresponding to 4-20mA input digitally settable from front panel
Peak/Normal mode selectable
Up to 9 peaks can be recorded and recalled
Buzzer annunciation at Peak
Relay output for load limit detection with limit digitally settable
Digital tare provided to remove initial error
Non-volatile memory for saving configuration
Configuration lock at rear to prevent tampering with Range
Aesthetically designed front panel with membrane switches

Specification :

Display	4 Digit 0.56” 7 segment Red LED display for Load (KN) 4 Digit 0.56” 7 segment Red LED display for Set Point (KN)
Range	Load: 1KN to Range Displacement: 0.1mm to 9999
Accuracy	±0.1% of Full Scale ± 1 digit
Input	From 2 wire loop transmitter giving 4-20mA output 4-20mA input => 0 - Range
Relay Logic	When Actual Load ≥ Set Load Limit relay switches On.
Normal/Peak Mode	Selectable from front panel with LED indication of mode
Peak Read	Last 9 peaks can be recalled with facility to reset memory
Peak Detection	Peak hold resettable by front Reset Switch or by parallel rear external contact
Tare Facility (Zero)	Digital Tare using front panel Tare switch up to a maximum of 50KN (for removing initial offset error)
Memory	Non-volatile EEPROM to save settings
Configuration Lock	On rear terminals to prevent unauthorized/accidental alteration of Range using front switches
Supply	220V AC ± 15% 50/60Hz
Dimensions	Front Fascia: 96mm x 192mm Cut Out : 92mm x 188mm

Send Enquiry

Peak Load And Displacement Recording Indicator For UTMs

Model CT904

Separate displays for load indication and maximum range
Range for load indication corresponding to 4-20mA input digitally settable from front panel
Peak/Normal mode selectable
Up to 9 peaks can be recorded and recalled
Buzzer annunciation at Peak
Relay output for load limit detection with limit digitally settable
Digital tare provided to remove initial error
Non-volatile memory for saving configuration
Configuration lock at rear to prevent tampering with Range
Aesthetically designed front panel with membrane switches

Specification:

Display	4 Digit 0.56” 7 segment Red LED display for Load (KN) 4 Digit 0.56” 7 segment Red LED display for Displacement (mm)
Range	Load: 1KN to Range Displacement: 0.1mm to 999.9
Accuracy	±0.1% of Full Scale ± 1 digit
Input	From 2 wire loop transmitter giving 4-20mA output, 4-20mA input => 0 – Range For displacement from 3 wire Rotary encoder (+5V pulses)
Relay Logic	Relay ON for 1. Load ≥ Set Load Limit 2. Displacement ≥ Set Displacement Limit 3. Load falling below Breaking Load after peaking
Normal/Peak Mode	Selectable from front panel with LED indication of mode
Peak Read	9 peaks of both load and displacement with facility to reset memory
Peak Detection	Peak hold is resettable from front Reset Switch or by a rear external contact
Tare Facility (Zero)	Digital Tare using front panel Tare switch (for removing initial error). Tare also resets Displacement to Zero
Memory	Non-volatile EEPROM to save settings
Configuration Lock	On rear terminals to prevent unauthorized/accidental alteration of Range using front switches
Supply	220V AC ± 15% 50/60Hz
Dimensions	Front Fascia: 96mm x 192mm Cut Out : 92mm x 188mm

Send Enquiry

Peak Load And Displacement Recording Indicator For UTMs

Digital Load And Displacement Logger With Rs-232 Or Direct Printer Output

Features :

Load & Displacement Indication for Universal Testing Machines
Large alphanumeric LCD display with backlight
Direct Thermal Printer or RS-232 output for PC selectable for storing time stamped Load and Displacement values
Direct display of instantaneous Pace rate
Sample Area digitally settable
Peak Stress displayed on peak detection
Internal Real Time Clock with battery backup
Peak/Normal mode selectable
Buzzer alarm for peak detection in Peak Mode
Relay output for over load and over carry detection
Digital tare provided
Non-volatile memory for saving configuration
Configuration Lock by Password
Aesthetically designed front panel with membrane switches

Specification :

Display	2 Line alphanumeric display with back light illumination
Range	Load - 0.1KN to 5000.0KN Displacement – 0.001 to 9999.9 mm Set Load (Limit) - 0.1KN to 5000.0KN Set Displacement – 0 to 5000.0 mm Sample Area - 0.1cm2 to 600.00cm2 Stress – 1 to 5000 KN/cm2
Accuracy	±0.1% of Full Scale ± 1 digit
Input	From 2 wire loop transmitter giving 4-20mA output 4-20mA input => 0 - Range
Relay Logic	ON when Load ≥ Set Load Limit OR Displacement ≥ Set Displacement.
Normal/Peak Mode	Selectable from front panel with indication on LCD
Real Time Clock	Internal RTC with rechargeable Ni-Cd. Battery backup
Peak Detection	Buzzer alarm re-settable from front Reset switch
Tare Facility (Zero)	Digital Tare for Load and Displacement using front panel Tare switch
Memory	Non-volatile EEPROM to save settings
Configuration Lock	Digital Password lock to prevent alteration of Calibration
Supply	220V AC ± 15% @ 50/60Hz
Dimensions	Front Panel: 96mm x 192mm Cut Out : 92mm x 188mm