We manufacture Digital Counters for applications like production counting using event counters, batch counting with preset limits, length counting with programmable multiplying factors etc.

6 Digit Preset Counter

Model 256

Specification

Display	: 6 Digit(0.39 inch Char Height, Red 7 Seg)
Range	: 999999
Size(Front Facia)	: 96 mm x 96 mm
Count Mode	: Up
Output	: 1 NO-P-NC Change Over Contact 5A/250V AC
Reset	: PushButton / Contact (Pulse Operation available against Request)
Output Mode	: Auto Repetitive or Single Cycle.
Power Supply	: 230 V AC +/- 10% or 12V DC
Operating Temperature	: 0 - 50°C
Storage Temperature	: - 10 to + 70°C

Send Enquiry

6 Digit Event Counter (Without Preset Limits)

6 Digit Event Counter (Without Preset Limits)

Model 246

Specification

Display	: 6 Digit(0.39 inch Char Height Red 7 Seg
Range	: 999999 Counts.
Reset Input	: Push Button / Contact ( Pulse Input available on Request)
Power Supply	: 230 V AC +/- 10% or12 V DC
Size	: PANEL CUTOUT : 41x92 mm or 92x 92 mm : FRONT FACIA : 48x96mm or 96x96 mm
Size

Send Enquiry

6 Digit Programmable Counter With Dual Set Limits

Model 2500

6 Digit Preset Counter
Dual Limits settable with dual relay output
Programmable Scale Factor of 0.001 to 999.999
Pre-settable Batch Counter
Cumulative 6 Digit Counter
Up/Down Counting Selectable
Normal/Auto-Reset with Time setting
Non-Volatile memory to hold settings and counts
Program configuration lock at rear
External Setting for Slow/Fast for noiseless operation

Specification

Display	: 6 Digit, 7 segment LED display (0.3” height)
Range	: Selectable least count of 0.001, 0.01, 0.1, 1. Maximum Count of 999999
Set Points	: Two set points each programmable from 0.001 to 999999
Batch Limit	: Batch limit setting from 0 to 999
Operating Modes	: a. Auto Mode b. Manual Mode c. No limit Mode (Event Counter)
Count Inputs	: a. Voltage Pulse : 3V to 30V DC amplitude from proximity switch b. Potential free contact from limit switch, relay or micro switch
Input Frequency	: a. 0 to 30 Hz b. 0 to 1 KHz
Sensor Supply	: 10V DC, short circuit protected
Scale Factor	: Programmable from 0.001 to 999.999
Reset Input	: a. Front Panel b. Remote reset
Relay Outputs	: Two relays, one for each set point; 1 C/O (SPDT) rated at 5Amp 230 V AC
Memory Retention	: 10 years
Configuration Lock	: Via rear DIP-Switch to avoid changes in configured parameters by mistake
Mounting	: Panel Mounting
Size	: 72mm x 72mm
Weight	: Approx. 375 gms.
Operating Temp.	: 0-50 degeesC
Humidity	: 95% RH

Send Enquiry

6 Digit Programmable Counter With Dual Set Limits

4 Digit Event Counter (Without Preset Limits)

4 Digit Event Counter (Without Preset Limits)

Model 244

CMOS/LSI Design For High Reliability & Accuracy.
Auto & Single Cycle Operation.
Counting by Contact, Pulse, Proximity & Photo Sensor Input.
12V/50 mA DC Output for Proximity Detector/Photo Sensor.
Built-in Ni-Cd, Rechargeable Battery Backup if required.

Display	: 4 Digit(0.5 inch Char Height Red 7 Seg)
Range	: 9999 Counts
Reset Input	: Push Button / Contact (Pulse Operation available against Request)
Power Supply	: 230 V AC +/- 10% or 12 V DC
Size	: PANEL CUTOUT : 41x92 mm OR 67x67 mm or 92x 92 mm : FRONT FACIA : 48x96mm OR 72x72 mm or 96x96 mm
Size

Send Enquiry

4 Digit Preset Counter

Model 254

CMOS/LSI Design For High Reliability & Accuracy.
Auto & Single Cycle Operation.
Counting by Contact, Pulse, Proximity & Photo Sensor Input.
12V/50 mA DC Output for Proximity Detector/Photo Sensor.
Built-in Ni-Cd, Rechargeable Battery Backup if required.

Specification

Display	: 4 Digit(0.5 inch Char Height Red 7 Seg)
Range	: 9999
Size(Front Facia)	: 96 mm x 96 mm OR 72mm x 72 mm
Count Mode	: UP
Output	: 1 NO-P-NC Change over Contact 5A/250V AC
Reset	: Push Button / Contact (Pulse Operation available against Request)
Output Mode	: Auto Repetitive or Single Cycle
Power Supply	: 230 V AC +/- 10% or 12 V DC
Operating Temperature	: 0 - 50°C
Storage Temperature	: - 10 to + 70°C